One of the top 5 PAM and PAC Manufacturers in China

• Classification:Chemical Auxiliary Agent
• CAS No.:1327-41-9
• Other Names:PAFC
• MF:Al2Cl(OH)5
• EINECS No.:215-477-2
• Purity:99.9%
• Type:poly aluminium ferric chloride
• Usage:Water Treatment Chemicals
• Product name:Food Grade White PAC Polyaluminium Chloride PAC Chemical Material
• Appearance:Golden Yellow Powder
• Application:Water Purification
• Function:Flocculation
• Basicity/%:40-90
• AL2O3/% ≥:29.0
• PH Value:3.5-5.0
• Density ≥:1.12
• Water Insoluble /% ≤:0.6

It is easy to feed, economical to use, effective at low dosages, and performs well over a wide pH range. It also precipitates phosphates from wastewater streams. MSDS: CIFSB: A Ferric sulfate based liquid coagulant with a cationic charge. It is a blended coagulant formulated with an inorganic polymer and cationic polymer. MSDS: CFS-125

Dictionary for Water Treatment Polymers; Product Applications. Polymer Testing Protocol; Coagulation and Bridger Approach; Dosage Calculations; Flocculants: Selecting Polymers and Jar Testing Procedures; Filterability Index; Antifreeze Recycling; Demulsifiying Oil: Emulsion Breaking Testing Instructions; Flocculants for Sand and Gravel

• Classification:Chemical Auxiliary Agent
• CAS No.:1327-41-9
• Other Names:PAC
• MF:[AL2(OH)nCL6-n]m
• EINECS No.:1327-41-9
• Purity:99%min
• Type:Water treatment chemicals Poly Aluminium chloride Drinking Grade PAC
• Usage:Water Treatment Chemicals
• Model Number:Drinking Grade
• Product name:Drinking water treatment chemicals Poly Aluminium chloride PAC
• Al2O3 % ≥:29.0
• Density (20C)/(g/cm3) ≥:1.12
• Basicity %:40 -90
• Water Insoluble% ≤:0.6
• PH Value (10g/L water solution):3.5 ~ 5.0
• Pb% ≤:0.001
• As % ≤:0.0002
• Cd% ≤:0.0002

Cationic polyacrylamide is effective flocculants over a wide range of PH and nontoxic. They could be specially used for the wastewater with negative charges. SINOFLOC offers a brand range of cationic polymer flocculant for municipal wastewater treatment like clarification or settling, sludge thickening and sludge dewatering.

•For maximum effectiveness, dry and emulsion polymers should be diluted with water up to 0.5% concentration prior to application. •Dry polymers are diluted with a day tank and low speed mixer; polymer is added with an eductor and funnel. Most dry polymers require 1 to 4 hours of solution aging. •Emulsion polymers may be diluted using a day tank and

• Classification:Chemical Auxiliary Agent
• CAS No.:9003-05-8
• Other Names:PAM
• MF:(C3H5NO)n
• EINECS No.:201-173-7
• Purity:90%
• Type:Water treatment chemical
• Usage:Petroleum Additives, Water Treatment Chemicals
• Solid Content(%):≥90
• Molecular Weight(million):19-23
• Solution Time(min):≤40
• Residual Monomer(%):≤0.05
• Color:White
• Degree of Hydrolysis(%):19-23
• Effective PH Value:5-14
• Appearance:White Granule Powder
• Type:Oilfield Additive Flocculant PAM

Cationic Flocculants for Municipal Wastewater Treatment. Therefore, the actual use of this is widely applied to the sludge dewatering treatment of urban sewage treatment plants, breweries, food factories, tanneries, petrochemical plants, oil fields, metallurgy, chemical industry and cosmetics.

Flocculants ( Polyelectrolyte ) - Chemicals Polyelectrolytes are water-soluble polymers carrying ionic charge along the polymer chain. Depending upon the charge, these polymers are anionic or cationic.

• Classification:Chemical Auxiliary Agent
• CAS No.:9003-05-8
• Other Names:Flocculant
• MF:(C3H5NO)n
• EINECS No.:231-673-0
• Purity:90%
• Type:Copolymerization Polyacrylamide, Copolymerization Polyacrylamide
• Usage:Petroleum Additives, Water Treatment Chemicals
• Model Number:PAM- Anionic
• Color:White
• Form:Powder or Granule
• Molecular Weight:19-23 or 7-18 Million
• Effective PH Value:5-14
• Degree of Hydrolysis:20-30%
• Solid Content:≥90%
• Residual Monomer Content:≤0.05%
• Dissolution Time:≤40 Minutes
• Sample:Availabe

polymer dissolution. Best practice is to use these in-line dilu-tion systems followed by a mixing/aging tank fitted with high/low level probes to refill the tank. The optimum concen-tration in the mixing/aging tank is 0.5 percent, and in no case should the initial concentration of the polymer be less than 0.25 percent for best results.

Accepta's comprehensive range of polymers has been developed to suit a wide variety of wastewater treatment and effluent treatment applications and includes structured polymers, co-polymers; and low, medium, high and very high molecular weight cationic and anionic polymers in both liquid/emulsion and dry/powder forms.

• Classification:Chemical Auxiliary Agent
• CAS No.:9003-05-8
• Other Names:Flocculant
• MF:(C3H5NO)n
• EINECS No.:231-673-0
• Purity:≥90%
• Type:Polyacrylamide, Polyacrylamide
• Usage:Paper Chemicals, Petroleum Additives, Water Treatment Chemicals
• Model Number:PAM- Anionic
• Color:White
• Form:Powder or Granule
• Molecular Weight:23-33 Million
• Effective PH Value:5-14
• Degree of Hydrolysis:35-45 %
• Solid Content:≥90%
• Residual Monomer Content:≤0.05%
• Dissolution Time:≤40 Minutes

The Use of Cationic Polymers as Primary Coagulants in Water Treatment. On fractionated waters, alum was best for removal of humic and fulvic acids as measured by UV absorbance, although polyDADMAC was as good for the river water; carbohydrates were a very minor component and there was little effect where data could be obtained; for proteins alum then DADMACs were the best performers for the river water.

Wastewater Treatment - Charge Types of Flocculants. The charge may be positive which designates the water treatment polymer as a cationic flocculant. The charge may be negative which designates the water treatment polymer as an anionic flocculant. The charge may be neutral which designates the water treatment polymer as a nonionic flocculant.

• Classification:Chemical Auxiliary Agent
• CAS No.:9003-05-8
• Other Names:PAM
• MF:(C3H5NO)n, (C3H5NO)n
• EINECS No.:201-173-7
• Purity:90%
• Type:Water Treatment agency
• Usage:Water Treatment Chemicals
• Product Name:Papermaking Dispersant PAM
• Material:Water Treatment Polymer
• Application:Paper Making
• Appearance:White Powder
• Daily Capacity:180tons
• EINECS NO.:201-173-7
• Other Name:PAM
• CAS NO.:9003-05-8

​Superfloc - Dry powder flocculants. These cationic flocculants are also offered in a range of molecular weights. This enables the customer to select the optimum polymer depending on application needs, such as low molecular weights for low shear applications (e.g. gravity belt thickener) to very high molecular weights for high shear environments (e.g. centrifuge decanters).

cationic polyacrylamide msds cationic polyacrylamide flocculant cationic polymer in water treatment White powder.

• Classification:Chemical Auxiliary Agent
• CAS No.:1327-41-9
• Other Names:PAFC
• MF:Al2Cl(OH)5
• EINECS No.:215-477-2
• Purity:99.9%
• Type:poly aluminium ferric chloride
• Usage:Water Treatment Chemicals
• Product Name:White Poly Aluminium Chloride 30%
• Appearance:Golden Yellow Powder, White Powder
• Application:Water Purification
• Function:Flocculation
• Basicity/%:40-90
• AL2O3/% ≥:29.0
• PH value:3.5-5.0
• Density ≥:1.12
• Water Insoluble /% ≤:0.6

In addition to wastewater treatment polymers, our selection includes acids, alkalis, filter aids, and sludge conditioners. Many of these chemicals are available in drum, tote, and bulk quantities, enabling you to obtain an amount that makes sense for the volume of wastewater you treat.

NOTES: (1) Coagulants should be be pre-diluted in water for best results (2) Flocculants MUST be pre-diluted in water for any results (3) Add cationic coagulant as far back in the line as possible (4) Do not add anionic flocculant too close to cationic coagulant Primary / Secondary Wastewater Treatment System AERATION BASIN MIXED LIQUOR FINAL OR