One of the top 5 PAM and PAC Manufacturers in China

• Classification:Chemical Auxiliary Agent
• CAS No.:9003-05-8
• Other Names:Flocculant
• MF:(C3H5NO)n
• EINECS No.:231-673-0
• Purity:90%
• Type:Coal Ash Powder Kneading Agent, Liquid Polyacrylamide Food Grade
• Usage:Petroleum Additives, Water Treatment Chemicals
• Model Number:PAM- Anionic
• Color:White
• Form:Powder or Granule
• Molecular Weight:16-20 Million
• Degree of Hydrolysis:7-18 %
• Effective PH Value:5-14
• Solid Content:≥90%
• Dissolution time:≤40 minutes
• Residual monomer content:≤0.05%
• Grade:Top Grade

Flocculants. Clay Settling Aids - polymers that enable dispersed clay to consolidate faster, allowing clean water to be recycled back to flotation plants Phosphate Rock Slurry Thickening Aids - polymers used to increase phosphate rock slurry concentrate grade prior to use in the phosphoric acid reactor. ArrMaz's technical experts will work...

Most flocculants in use today are synthetic water soluble polymers based on acrylamide and its derivatives and which may include either anionic or cationic groups in a wide range of molecular weights and charge densities.

• Classification:Chemical Auxiliary Agent
• CAS No.:9003-05-8
• Other Names:Flocculant
• MF:(C3H5NO)n
• EINECS No.:231-673-0
• Purity:≥90%
• Type:Polyacrylamide, Polyacrylamide
• Usage:Paper Chemicals, Petroleum Additives, Water Treatment Chemicals
• Model Number:PAM- Anionic
• Color:White
• Form:Powder or Granule
• Molecular Weight:23-33 Million
• Effective PH Value:5-14
• Degree of Hydrolysis:35-45 %
• Solid Content:≥90%
• Residual Monomer Content:≤0.05%
• Dissolution Time:≤40 Minutes

Cationic Flocculants. SINOFLOC cationic flocculants are co-polymers of acrylamide with increasing proportions of cationic monomers. The cationic groups, which are thus introduced into the polymer, have positive charges in aqueous solution. Our cationic polyacrylamide is available in solid powder and emulsion forms.

Cationic polymers have molecular weights which range from a few hundred thousand to over ten million weight units. Flocculation and Polymer Principles for Cationic and Anionic Polymers Cationic and anionic flocculants, aka, flocculents greatly enhance separating solids from water solutions.

• Classification:Chemical Auxiliary Agent
• CAS No.:9003-05-8
• Other Names:PAM
• MF:(C3H5NO)n, (C3H5NO)n
• EINECS No.:201-173-7
• Purity:90%
• Type:Water Treatment agency
• Usage:Water Treatment Chemicals
• Product Name:Papermaking Dispersant PAM
• Material:Water Treatment Polymer
• Application:Paper Making
• Appearance:White Powder
• Daily Capacity:180tons
• EINECS NO.:201-173-7
• Other Name:PAM
• CAS NO.:9003-05-8

With anionic flocculants there is a tendency to use high or very high molecular weight polymers as low molecular weight, highly anionic polymers can behave as dispersants. Unlike cationic flocculants, the charge carried by anionic flocculants can be due to a number of different element groupings, however the principal types in commercial use are the carboxyl ion and the sulphonic acid groups.

ChemTreat's flocculant and coagulant water treatment chemicals enable solids removal for effluent water treatment, water clarification, and lime softening.

• Classification:Chemical Auxiliary Agent
• CAS No.:9003-05-8
• Other Names:Flocculant
• MF:(C3H5NO)n
• EINECS No.:231-673-0
• Purity:90%
• Type:Manufacturer Electroplate Factory Waste Water Treatment Flocculant PAM, Manufacturer Electroplate Factory Waste Water Treatment Flocculant PAM
• Usage:Water Treatment Chemicals
• Model Number:PAM- Anionic
• Molecular Weight:19-21 million
• Form:Powder or Granule
• Color:White
• Solid Content:≥90%
• PH Value:5-14
• Residual Monomer Content:≤0.05%
• Degree of Hydrolysis:20-30%
• Dissolution Time:≤40 Minutes
• Grade:Top Grade

Zetag ® Flocculant Technology. For many years cationic polyacrylamide flocculants have been used in the sludge dewatering process. Optimising the dewatered biosolids is essential to maintain the sustainability and efficiency of the process. Higher cake solids reduce the energy required for transporting and disposing at a landfill.

Tramfloc, Inc. manufactures more than 2,000 different polymeric formulations including flocculants, coagulants, emulsion breakers, super plasticizers, erosion control polymers, dust suppressant polymers, and super absorbent polymers. We make liquid, solution, emulsion, granular, bead, tablet and log forms of the polymers.

• Classification:Chemical Auxiliary Agent
• CAS No.:9003-05-8
• Other Names:PAM
• MF:(C3H5NO)n
• EINECS No.:201-173-7
• Purity:90%
• Type:Water treatment chemical
• Usage:Water Treatment Chemicals
• Type:Agent Flocculating Water Treatment PAM Coagulant Aid
• Appearance:White Granule Powder
• Color:White
• Solid Content(%):≥90
• Molecular Weight(million):19-23
• Solution Time(min):≤40
• Degree of Hydrolysis(%):19-23
• Residual Monomer(%):≤0.05
• Effective PH Value:5-14

Together with our dry polymer process, which achieves high molecular weights, this often results in a cost savings. Our portfolio also includes high-performance emulsion flocculants. Our proprietary emulsion breaker and carrier systems result in reduced polymer emulsion settling rates and low formation of insoluble material.

A third category of cationic coagulant, dicyandiamide (DICY POLYMER) is offered for specific industrial applications. All organic coagulants are 100-per-cent cationic charge materials. Kemira's flocculants are high molecular weight water-soluble polymers used in numerous industrial applications.

• Classification:Chemical Auxiliary Agent
• CAS No.:9003-05-8
• Other Names:PAM
• MF:(C3H5NO)n
• EINECS No.:201-173-7
• Purity:90%
• Type:Polyacrylamide Flocculant PAM
• Usage:Water Treatment Chemicals
• Type:Polyacrylamide Flocculant PAM
• Appearance:White Granule Powder
• Solid Content(%):≥90
• Color:White
• Molecular Weight(million):19-23
• Solution Time(min):≤40
• Degree of Hydrolysis(%):19-23
• Residual Monomer(%):≤0.05
• Package:25kg/bag

​Superfloc - Dry powder flocculants. These cationic flocculants are also offered in a range of molecular weights. This enables the customer to select the optimum polymer depending on application needs, such as low molecular weights for low shear applications (e.g. gravity belt thickener) to very high molecular weights for high shear environments (e.g. centrifuge decanters).

Flocculants. Water soluble organic polymer coagulants with a molecular weight in the range 10 5 and 10 6 are used to promote the formation of flocs from suspended solids in water. Flocculants can be anionic (−ve), cationic (+ve) or ampholytic (mixed +ve and −ve). Cationic polymers are usually based on nitrogen, anionic polymers on carboxylate.

• Classification:Chemical Auxiliary Agent
• CAS No.:9003-05-8, 9003-05-8
• Other Names:PAM, PAM
• MF:(C3H5NO)n, (C3H5NO)n
• EINECS No.:201-173-7, 201-173-7
• Purity:90%
• Type:Water Treatment agency
• Usage:Water Treatment Chemicals
• Product Name:Anionic Polyacrylamide Flocculation Agent for Textile Sizing Agent
• Material:Water Treatment Polymer
• Appearance:White Powder
• Application:Coal Washing and Mineral Separtion
• Function:Water Treatment Chemicals

Some polymers are good flocculants. Polymers are chemical compounds that have very large molecules composed of one or more structural units that are joined together in a repeating pattern to form long chain-like macromolecules. The two red wavy ribbons in Figure 1 represent polymer molecules + +-Soil +-+ +-+ + - - + Soil-+ +-Soil Cationic Polymer Chains--Soil Soil Ion Bridge

Anionic Polyacrylamide in Argentina Sugar Mill , Find Complete Details about Anionic Polyacrylamide in Argentina Sugar Mill,Anionic Polyacrylamide,Polyacrylamide In Sugar Mill from Supplier or Manufacturer-Chemicals