One of the top 5 PAM and PAC Manufacturers in China

• Classification:Chemical Auxiliary Agent
• CAS No.:9003-05-8
• Other Names:PAM
• MF:(C3H5NO)n, (C3H5NO)n
• EINECS No.:201-173-7
• Purity:90%, 90%
• Type:Partially Hydrolyzed Polyacrylamide (PHPA) MSDS
• Usage:Petroleum Additives, Water Treatment Chemicals
• Color:White
• Solid Content(%):≥90
• Degree of Hydrolysis(%):19-23
• Solution Time(min):≤40
• Effective PH Value:5-14
• Residual Monomer(%):≤0.05
• Type:Partially Hydrolyzed Polyacrylamide (PHPA) MSDS

They assure that the water received at the point of use is of the highest quality and purity always. This is ensured by the use of the right Activated Carbon products in water filters at the Point of Entry and Point of Use in the water treatment systems for the positive control of taste and odour in the Municipal and the Desalination water treatment systems.

However, it has been found that these husks can be converted into a high quality microporous activated carbon (Pollard et al, 1995). Activated carbon has many uses in drinking water and wastewater treatment, including the removal of taste and odour-producing chemicals (Lalezary-Craig et al, 1988), algal toxins

• Classification:Chemical Auxiliary Agent
• CAS No.:1327-41-9
• Other Names:PAFC
• MF:Al2Cl(OH)5
• EINECS No.:215-477-2
• Purity:99.9%
• Type:poly aluminium ferric chloride
• Usage:Water Treatment Chemicals
• Product name:Affordable Price Light Yellow Powder Poly Aluminium Chloride PAC
• Appearance:Light Yellow Powder
• Function:Flocculation
• Application:Water Purification
• Basicity/%:40-90
• AL2O3/% ≥:29.0
• PH Value:3.5-5.0
• Density ≥:1.12
• Water Insoluble /% ≤:0.6

Activated carbon can be prepared from many common substances that are high in carbon, and bituminous coal is a typical starting point. First, coal is heated in the absence of oxygen. It may then be exposed to other chemicals, such as argon and nitrogen, and heated again in the presence of steam and oxygen.

filter or in the water. If a carbon treatment device has not been used for five days or longer, running the water for 10 to 30 seconds, or until 1 to 2 quarts have passed through, reduces bacterial count in the treated water. As a precaution, activated carbon filters are recommended for use only on microbiologically safe (coliform negative) water.

• Classification:Chemical Auxiliary Agent
• CAS No.:9003-05-8
• Other Names:Flocculant
• MF:(C3H5NO)n, (C3H5NO)n
• EINECS No.:231-673-0, 231-673-0
• Purity:90%, 90%
• Type:partially hydrolized polyacrylamide price
• Usage:Water Treatment Chemicals
• Model Number:PAM- Anionic
• Form:Powder or Granule
• Molecular Weight:16-20 Million
• Effective PH Value:5-14
• Degree of Hydrolysis:7-18 %
• Solid Content:≥90%
• Residual monomer content:≤0.05%
• Dissolution time:≤40 minutes

Activated Carbon Properties. Our Activated carbon products are made from top quality row materials to ensure the highest quality during the manufacturing process. By maintaining high quality control standards, the end user is able to achieve high adsorption of their molecular impurities. Activated carbon is especially effective in removing trace organic compounds.

Activated carbon is available as powdered activated carbon (PAC) and granular activated carbon (GAC). PAC is made from organic materials with high carbon contents such as wood, lignite and coal. PAC typically has a diameter less than 0.1 mm and an apparent density ranging between 23 and 46 lb/ft 3 , depending on the material used and manufacturing process.

• Classification:Chemical Auxiliary Agent
• CAS No.:1327-41-9
• Other Names:PAFC
• MF:Al2Cl(OH)5
• EINECS No.:215-477-2
• Purity:99.9%
• Type:poly aluminium ferric chloride
• Usage:Water Treatment Chemicals
• Product Name:Poly Aluminium Ferric Chloride 29% High Quaiity PAFC
• Appearance:Golden Yellow Powder
• Application:Water Purification
• Function:Flocculation
• Basicity/%:40-90
• AL2O3/% ≥:29.0
• PH Value:3.5-5.0
• Density ≥:1.12
• Water Insoluble /% ≤:0.6

carbon, several activated carbon filters are connected in series, be-cause then a maximum load in the first filter can be achieved. Impuri-ties which cannot be adsorbed in the first filter anymore are adsorbed in the next filters and therefore cannot return to the water cycle. The use of granular activated carbon in fixed bed filters also gives the

The chlorine capacity of new activated carbon is 1 pound of chlorine per pound of carbon at a flow rate of 3 to 5 gpm/cu.ft. and a bed depth of 3 feet. Chloramine removal by activated carbon is a much slower reaction. The predominant species of chloramine in city water supplies (pH about 7 to 8) is monochloramine.

• Classification:Chemical Auxiliary Agent
• CAS No.:9003-05-8
• Other Names:PAM
• MF:(C3H5NO)n
• Purity:88%
• Type:Water treatment chemical, PAM Anionic Polyacrylamide Water Treatment Chemical Flocculant
• Usage:Paper Chemicals, Water Treatment Chemicals
• Model Number:7 series
• Appearance:White Granule Powder
• Color:White
• Molecular Weight(million:19-23
• Solid Content(%):≥88
• Degree of Hydrolysis(%):19-23
• Solution Time(min):≤40
• Residual Monomer(%):≤0.05
• Effective PH Value:5-14

Activated carbon is a high purity form of carbon with a very high surface area, characterised by microscopic pores. It is also sometimes referred to as active carbon or activated charcoal. It is generally manufactured from carbonaceous raw materials such as high quality coals, coconut shells or wood, although other raw materials are constantly ...

Activated carbon (also called activated charcoal, activated coal or active carbon) is a very useful adsorbent. Due to their high surface area, pore structure (micro, meso and macro), and high degree of surface reactivity, activated carbon can be used to purify, dechlorinate, deodorize and decolorize both liquid and vapor applications.

• Classification:Chemical Auxiliary Agent
• CAS No.:9003-05-8, 9003-05-8
• Other Names:PAM, PAM
• MF:(C3H5NO)n, (C3H5NO)n
• EINECS No.:201-173-7, 201-173-7
• Purity:90%
• Type:Water Treatment agency
• Usage:Water Treatment Chemicals
• Product Name:Anionic Polyacrylamide Flocculation Agent for Textile Sizing Agent
• Material:Water Treatment Polymer
• Appearance:White Powder
• Application:Coal Washing and Mineral Separtion
• Function:Water Treatment Chemicals

Activated carbon is a processed, porous version of carbon that has many different uses, especially adsorption and chemical reaction needs for water and gas purification.Because activated carbon particles are so porous, they have very expansive surface areas tucked into the holes and tunnels all over their surface.

Granular activated carbon is made from raw organic materials (such as coconut shells or coal) that are high in carbon. Heat, in the absence of oxygen, is used to increase (activate) the surface area of the carbon; this is why these filters are sometimes referred to as "charcoal" filters.

• Classification:Chemical Auxiliary Agent
• CAS No.:1327-41-9
• Other Names:PAC
• MF:[Al2(OH)nCl6-n]m
• EINECS No.:215-477-2
• Purity:99.9%
• Type:high quality 30% poly aluminium chloride
• Usage:Water Treatment Chemicals
• Product name:30% Poly Aluminium Chloride Drinking Water Grade PAC
• Color:Light Yellow
• Application:Drinking Water Purification
• Certification:GB15892-2009
• AL2O3/% ≥:29-30
• Basicity/%:60-85
• Water Insoluble/% ≤:0.3
• PH Value:3.5-5.0
• Appearance:Powder

The future of industrial wastewater. As water reuse becomes increasingly important from a sustainability position, activated carbon will become a central component of the water treatment train because of its versatility. For some industrial wastewaters, additional treatment efforts, such as UV disinfection, reverse osmosis or ultrafiltration,...

The use of granular activated carbon (GAC) for water purification became common around the start of the 20th century (1906) when the "activation" process was applied to charcoal (which had been used for centuries). Thermal activation of charcoal greatly improves its pore volume, surface area and